2021-2026 Ford Bronco | Rear Speaker & Light Mount
This crossbar was designed to provide your Bronco additional mounting options for rear facing LED lights and speaker cans, or a speaker bar. It mounts directly to OEM locations with provided hardware, and is functional with your hard or soft top on or off.
Ā The bar measures 29-inches in total length, and is 2-inches in diameter. There is a 10-inch slotted flat mount in the middle of the bar. 4 holes, 2 towards each end, allow you to run wiring hidden inside the bar. It is finished in a Micro-Texture Black Powder Coat, which blends well with the OEM trim.
Ā There are several possible configurations you can run. Two speaker cans with roll bar clamps can be installed, with up to a 6-inch light bar or two 3-inch pod lights on the flat mount. You can run a 20-inch light bar across the length of the bottom if utilizing the back rail mounts on the bar. Alternatively, a speaker bar up to 28-inches wide with roll bar clamps can be mounted across the bottom of the bar.
Ā ***NOTE: This was designed for the 4-door Bronco models only, it does not fit 2-door models.
Key Features:
- Designed for Speaker Cans or a Speaker Bar with Roll Bar Clamp Mounts
- 10ā Flat Mount for Light Bar or Light Pods on Top or Below Bar
- 4 Hidden Wiring Access Points
- 3mm Plate Steel & 2ā x 1.5mm Tube Steel
- Micro-Texture Black Powder Coat
- Installs to OEM Locations
- Retains OEM Antenna Functionality
The speakers featured on our Bronco are Alpine SPV-65-SXS Speakers.
More Images
2021-2026 Ford Bronco | Rear Speaker & Light Mount
This crossbar was designed to provide your Bronco additional mounting options for rear facing LED lights and speaker cans, or a speaker bar. It mounts directly to OEM locations with provided hardware, and is functional with your hard or soft top on or off.
Ā The bar measures 29-inches in total length, and is 2-inches in diameter. There is a 10-inch slotted flat mount in the middle of the bar. 4 holes, 2 towards each end, allow you to run wiring hidden inside the bar. It is finished in a Micro-Texture Black Powder Coat, which blends well with the OEM trim.
Ā There are several possible configurations you can run. Two speaker cans with roll bar clamps can be installed, with up to a 6-inch light bar or two 3-inch pod lights on the flat mount. You can run a 20-inch light bar across the length of the bottom if utilizing the back rail mounts on the bar. Alternatively, a speaker bar up to 28-inches wide with roll bar clamps can be mounted across the bottom of the bar.
Ā ***NOTE: This was designed for the 4-door Bronco models only, it does not fit 2-door models.
Key Features:
- Designed for Speaker Cans or a Speaker Bar with Roll Bar Clamp Mounts
- 10ā Flat Mount for Light Bar or Light Pods on Top or Below Bar
- 4 Hidden Wiring Access Points
- 3mm Plate Steel & 2ā x 1.5mm Tube Steel
- Micro-Texture Black Powder Coat
- Installs to OEM Locations
- Retains OEM Antenna Functionality
The speakers featured on our Bronco are Alpine SPV-65-SXS Speakers.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This crossbar was designed to provide your Bronco additional mounting options for rear facing LED lights and speaker cans, or a speaker bar. It mounts directly to OEM locations with provided hardware, and is functional with your hard or soft top on or off.
Ā The bar measures 29-inches in total length, and is 2-inches in diameter. There is a 10-inch slotted flat mount in the middle of the bar. 4 holes, 2 towards each end, allow you to run wiring hidden inside the bar. It is finished in a Micro-Texture Black Powder Coat, which blends well with the OEM trim.
Ā There are several possible configurations you can run. Two speaker cans with roll bar clamps can be installed, with up to a 6-inch light bar or two 3-inch pod lights on the flat mount. You can run a 20-inch light bar across the length of the bottom if utilizing the back rail mounts on the bar. Alternatively, a speaker bar up to 28-inches wide with roll bar clamps can be mounted across the bottom of the bar.
Ā ***NOTE: This was designed for the 4-door Bronco models only, it does not fit 2-door models.
Key Features:
- Designed for Speaker Cans or a Speaker Bar with Roll Bar Clamp Mounts
- 10ā Flat Mount for Light Bar or Light Pods on Top or Below Bar
- 4 Hidden Wiring Access Points
- 3mm Plate Steel & 2ā x 1.5mm Tube Steel
- Micro-Texture Black Powder Coat
- Installs to OEM Locations
- Retains OEM Antenna Functionality
The speakers featured on our Bronco are Alpine SPV-65-SXS Speakers.
